AP which is a pressure-sealed single-slot flush-mounted broadband airborne antenna.

Pages 1 - 2 - 3 - 4 - 5 - 6

INCH-POUND

MIL-DTL-25895A

4 January 2007

SUPERSEDING

MIL-A-25895(USAF)

30 August 1957

DETAIL SPECIFICATION

ANTENNA AT-505/AP

This specification is approved for use by all Depart-

ments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification establishes the requirements for Antenna AT-505/AP which is a pressure-sealed

single-slot flush-mounted broadband airborne antenna.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 or 4 of this specification. This section

does not include documents cited in other sections of this specification or recommended for additional information or

as examples. While every effort has been made to ensure the completeness of this list, document users are

cautioned that they must meet all specified requirements of documents cited in sections 3 or 4 of this specification,

whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract (see 6.2).

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-17

Cables, Radio Frequency, Flexible and Semi-rigid, General Specification for.

MIL-E-5400

Electronic Equipment, Aerospace, General Specification for.

MIL-I-24768/1

Insulation, Plastic , Laminated, Thermosetting, Glass-Cloth, Melamine-Resin (GME).

MIL-PRF-39012

Connectors, Coaxial, Radio Frequency, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-130

Identification Marking of U. S. Military Property.

MIL-STD-810

Environmental Engineering Considerations and Laboratory Tests.

(Copies of these documents are available on line at https://assist.daps.dla.mil/quicksearch or from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

Comments, suggestions, or questions on this document should be addressed to Defense Supply Center, Columbus,

ATTN: DSCC-VAT, P.O. Box 3990, Columbus, OH 43218-3990 or emailed to Tubesamps@dscc.dla.mil. Since

contact information can change, you may want to verify the currency of this address information using the ASSIST

AMSC N/A

FSC 5985