MIL-DTL-23351B
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from
the Document Automation and Production Service, Building 4D (DPM-DoDSSP), 700 Robbins Avenue, Philadelphia,
PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of the documents that are DoD adopted are those listed in the issue of
the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS are
the issues of the documents cited in the solicitation (see 6.2).
ASTM INTERNATIONAL
ASTM-B210
-
Aluminum and Aluminum-Alloy Drawn Seamless Tubes (DoD adopted).
ASTM-B372
-
Seamless Copper and Copper-Alloy Rectangular Waveguide Tube (DoD adopted).
(Application for copies should be addressed to the ASTM International, P.O. Box C700, 100 Barr Harbor Drive,
West Conshohocken, PA 19428-2959.)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME-B46.1
-
Surface Texture (Surface Roughness, Waviness and Lay).
ASME-Y14.5.1M
-
Principles, Dimensioning and Tolerancing, Mathematical Definition of (DoD adopted).
(Copies of these documents are available from www.asme.org or ASME Information Central Orders/Inquiries,
P.O. Box 2300, Fairfield, NJ 07007-2300.)
(Technical society and technical association specifications and standards are generally available for reference
from libraries. They are also distributed among technical group and using Federal agencies.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the reference cited
herein (except for related specification sheets), the text of this document takes precedence. Nothing in this
document, however, supercedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheet. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Material. The material shall be as specified (see 3.1). Acceptance or approval of any constituent material shall
not be construed as a guaranty of the acceptance of the finished product.
3.2.1 Aluminum alloy. Aluminum alloys 6061 and 6063 shall conform to the chemical composition limits of ASTM-
B210. Aluminum alloy 6061 and 6063 waveguides shall be furnished in the F temper.
3.2.2 Copper alloy. Copper alloy shall conform to commercial bronze, 90 percent of ASTM-B372.
3.2.3 Copper. Copper shall conform to type OF or DLP of ASTM-B372.
3.2.4 Silver alloy. Silver alloy shall conform to the chemical composition requirements for grade C (coin silver). In
addition, silver alloy waveguides shall be furnished in the drawn temper with a Rockwell hardness of 45.0 to 80.0 on
the "B" scale.
3.3 Design and construction. Waveguides shall be of the design, construction, and physical dimensions specified
(see 3.1). Eccentricity (see 6.4) shall not exceed 10 percent. Dimensioning and tolerancing shall be interpreted in
accordance with ASME-Y14.5.1.
3.3.1 Finish. The interior and exterior surfaces of the waveguide shall be bright, smooth, dry, and free of scales or
oxide.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business