combiners. Specific requirements tailored for ┬ôspace flight application┬ö components are included to represent the highest reliability components specified herein. Such components are intended for use in NASA manned, satellite, interplanetary or launch vehicle programs.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10

INCH-POUND

MIL-DTL-23971D

7 May 2012

SUPERSEDING

MIL-DTL-23971C

20 August 2001

DETAIL SPECIFICATION

POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS,

GENERAL SPECIFICATION FOR

This specification is approved for use by all Departments

and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the general requirements for power dividers, power combiners, and power

divider/combiners. Specific requirements tailored for "space flight application" components are included to represent

the highest reliability components specified herein. Such components are intended for use in NASA manned,

satellite, interplanetary or launch vehicle programs.

1.2 Part or Identifying number (PIN). The military PIN consists of the letter "M", the basic number of the

specification sheet and an assigned dash number (see 3.1).

23791/1-

Military designator and

Dash

Space flight

specification sheet number

number

application

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This

section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this

specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

Comments, suggestions or questions on this document should be addressed to DLA Land and Maritime, ATTN:

VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to Tubesamps@dla.mil. Since contact

information can change, you may want to verify the currency of this address information using the ASSIST Online

AMSC N/A

FSC 5985