MIL-DTL-39030/16B
Solderability: Method 208 of MIL-STD-202, the following details and exception shall apply:
a. Number of terminations of each part to be tested: One contact.
b. Special preparation of terminations: No wiping, cleaning, scraping, or abrasive cleaning of the contact shall be
performed.
c. Depth of immersion: The entire surface of the contact shall be covered.
d. Method of mounting: The dummy load shall be mounted onto a heat sink.
e. Examination of terminations: There shall be no evidence of pinholes and blistering.
Note: This test shall be preformed after the visual and mechanical inspection in qualification.
Part or Identifying Number (PIN): M39030/16-(dash number from figure 1).
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent
of the changes.
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 11
(Project 5985-1244-010)
DLA - CC
Review activities:
Army - AV, MI
Navy - AS, OS, SH
Air Force - 19
3