MIL-DTL-39030/22A
Solderability: Method 208 of MIL-STD-202, the following details and exception shall apply:
a. Number of terminations of each part to be tested: One contact.
b. Special preparation of terminations: No wiping, cleaning, scraping, or abrasive cleaning of the contact shall be
performed.
c. Depth of immersion: The entire surface of the contact shall be covered.
d. Method of mounting: The dummy load shall be mounted onto a heat sink.
e. Examination of terminations: There shall be no evidence of pinholes and blistering.
Note: This test shall be preformed after the visual and mechanical inspection is qualification.
Part or Identifying Number (PIN): M39030/22-01.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the
previous issue due to the extent of the changes.
Referenced documents: In addition to MIL-DTL-39030, this document references the following:
ASTM B488
ASTM B196/B196M
MIL-STD-202
ASTM B197/B197M
SAE-AMS-QQ-N-290
ASTM B194
SAE-AMS-QQ-S-763
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 85
DLA - CC
(Project 5985-2013-020)
Review activities:
Army - AV, MI
Navy - AS, OS, SH
Air Force - 19
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of information above
using the ASSIST Online database at https://assist.dla.mil.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business