MIL-DTL-3933/17D
ENGINEERING DATA:
Operating frequency range: DC to 4.5 GHz for PINs M3933/17-01 through -06; DC to 18 GHz for PINs M3933/17-
07 through -24.
Test frequency ranges for SWR and attenuation measurements, measured or recorded, when using an Automatic
Network Analyzer (ANA) or equivalent:
100 MHz (or lower) to 4.5 GHz for PINs M3933/17-01 through -06;
100 MHz (or lower) to 18 GHz for PINs M3933/17-07 through -24.
Basic test frequencies for sensitive measurements like connector repeatability, temperature sensitivity, power
sensitivity and any other measurements where a `delta spec is imposed:
2.0 GHz for PINs M3933/17-01 through -06;
8.0 GHz for PINs M3933/17-07 through -24.
Operating temperature range: -55°C to 125°C.
Maximum weight: See table I.
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Nominal impedance: 50 ohms.
Attenuation: See table I. Stability and sensitivity:
Maximum change in attenuation after:
Up to 10 dB, inclusive (dB)
Over 10 dB (dB/dB)
Temperature change or thermal shock
0.5
0.05
Vibration or shock
0.5
0.05
Moisture resistance or salt spray
0.5
0.05
Peak power
0.5
0.05
Frequency sensitivity, maximum:
0.4 dB/dB/GHz.
Temperature sensitivity of attenuation, maximum: 0.0006 dB/dB/°C.
Power: See table I.
Power sensitivity for full input power, maximum:
0.005 dB/dB/Watt.
VSWR: See table I.
Connector repeatability, maximum variation in attenuation: 0.04 dB.
Part or Identifying Number (PIN): M3933/17- (and dash number from table I with three device level designators are
space level (T), screened (S) and non-screened (N) options).
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business