MIL-DTL-87104C
DEPARTMENT OF DEFENSE STANDARDS
-
Identification Marking of U.S. Military Property.
-
Finishing of Metal and Wood Surfaces.
-
Impregnation of Porous Metal Castings and Powdered Metal Components.
-
Environmental Engineering Considerations and Laboratory Tests.
-
Dissimilar Metals.
(Copies of these documents are available online at https://quicksearch.dla.mil / or https://assist.dla.mil/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
-
Surface Texture, Surface Roughness Waviness and Lay.
(Application for copies should be addressed to: ASME International, Three Park Avenue, New York, NY 10016-
5990, https://www.asme.org, infocentral@asme.org.)
AMERICAN SOCIETY OF TESTING MATERIALS (ASTM)
-
Steel, Bars, Billets and Forgings, Stainless.
-
Bars, Free Machining Stainless Steel.
-
Rod, Brass, Free-Cutting, Bar and Shapes for Use in Screw Machines.
-
Plate, Brass, Sheet, Strip, and Rolled Bar.
-
Plate, Leaded Brass, Sheet, Strip, and Rolled Bar.
-
Copper and Copper Alloy Forging Rod, Bar, and Shapes.
-
Rod, Phosphor Bronze, Bar, and Shapes.
-
Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar.
-
Rod and Bar, Copper-Beryllium Alloy.
-
Wire, Alloy Copper-Beryllium.
-
Aluminum and Aluminum-Alloy Bar, Rod, and Wire.
-
Electrodeposited Coatings of Silver for Engineering Use.
-
Insulation, Solid Electrical, High-Voltage, Low-Current, Dry Arc-Resistance
of.
-
Tubing, Extruded and Compression Molded Polytetrafluroethylene (PTFE)
Rod and Heavy Walled.
-
Radiographic Examination.
(Application for copies should be addressed to: ASTM International, 100 Barr Harbor Drive, West Conshohocken,
PA 19428-2959. https://www.astm.org/, webmaster@astm.org.)
ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES (IPC)
-
Requirements For Soldered Electrical And Electronic Assemblies.
-
Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders
for Electronic Soldering Applications, Requirements for.
(Application for copies should be addressed to: IPC-Association Connecting Electronics Industries, 2215 Sanders
Road, Northbrook, IL 60062-6135. www.ipc.org.
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
-
Plating, Gold.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business