MS25048B
NOTES:
1. Dimensions in inches, unless otherwise specified, tolerances: one place decimal ±.1, two place decimals ±.02.
2. This specification sheet takes precedence over documents referenced herein.
3. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of
Specifications and Standards (DODISS) specified in the solicitation form a part of this specification to the extent specified herein.
4. Material: Body, glass fiber reinforced polyester resin binder, MIL-R-7575 or material of equal or better mechanical and electrical properties and suitable for the purpose.
5. Threads shall conform to MIL-S-7742.
6. Maximum weight: 3.40 pounds.
FIGURE 1. Dimensions and configuration - Continued.
MS PIN 1/ |
A |
|
Max |
Min |
|
MS25048-1A |
5.5 |
4.5 |
MS25048-1B |
5.5 |
4.5 |
1/ Example of part numbers:
MS25048-1A: Mast, antenna, dead-end: 7,500 volts. MS25048-1B: Mast, antenna, dead-end: 10,000 volts.
Procurement specification: MIL-DTL-7965.
Referenced documents. In addition to MIL-DTL-7965, this document references the following: MIL-R-7575
MIL-S-7742
MS25051
MS25056
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing activity: Navy - AS DLA- CC
Air Force - 11
DLA - CC (Project 5985-1329)
Review activity: Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business