INCH-POUND
MIL-DTL-15370J
17 June 2011
SUPERSEDING
MIL-DTL-15370H
26 June 2006
DETAIL SPECIFICATION
COUPLERS, DIRECTIONAL
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for radio and microwave frequency directional
couplers (see 6.1).
1.2 Part or Identifying Number (PIN) classification. The military PIN consists of the letter "M", the basic number of
the specification sheet, and an assigned dash number (see 3.1), as shown in the following example:
M15370/14-
001
Military designator and
Dash number designated
specification sheet number
on specification sheet
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
cited in the solicitation or contract (see 6.2).
COMMERCIAL ITEM DESCRIPTIONS
A-A-59126
-
Terminals, Feedthru (Insulated) and Terminals, Stud (Insulated and Non-insulated).
Comments, suggestions or questions on this document should be addressed to DLA Land and Maritime, ATTN: VAT,
Post Office Box 3990, Columbus, OH 43218-3990, or emailed to TubesAmps@dla.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 5985
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business