MIL-DTL-15370J
ASTM INTERNATIONAL
-
Steel, Bars, Billets and Forgings, Stainless.
-
Free-Machining Stainless Steel Bars.
-
Free Cutting Brass Rod, Bar and Shapes for Use in Screw Machines .
-
Aluminum-Alloy Sand Castings.
-
Plate Brass, Sheet, Strip, and Rolled Bar.
-
Aluminum-Alloy Die Castings.
-
Aluminum-Alloy Permanent Mold Castings.
-
Leaded Brass Plate, Sheet, Strip, and Rolled Bar.
-
Copper and Copper Alloy Forging Rod, Bar, and Shapes.
-
Copper Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar.
-
Copper Beryllium Alloy Rod and Bar.
-
Copper Beryllium Alloy Wire.
-
Aluminum and Aluminum-Alloy Sheet and Plate.
-
Aluminum and Aluminum-Alloy Bar, Rod, and Wire.
-
Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles and Tubes.
-
Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube.
-
Aluminum-Alloy 6061-T6 Standard Structural Shapes.
-
Pig Tin.
-
Tin, Electrodeposited Coatings of.
-
Standard Specification for Electrodeposited Coatings of Palladium for
Engineering Use.
-
Electrodeposited Coatings of Silver for Engineering Use.
-
Rod and Heavy-Walled Tubing, Extruded and Compression Molded,
Polytetrafluoroethylene (PTFE).
-
Materials to Fungi, Synthetic Polymeric, Determining Resistance of.
(Copies can be obtained online at https://www.astm.org or requested from ASTM INTERNATIONAL, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
-
Equipment, Quality Assurance Requirements for Measuring - Part 1:
Metrological Confirmation System for Measuring Equipment.
(Copies of the document are available from the International Organization for Standardization, American National
nd
th
Standards Institute, 11 West 42 Street, 13 Floor, New York, NY 10036 or at https://www.iso.ch.)
NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)
-
Laboratories, Calibration and Measuring and Test Equipment.
(Copies of the above document can be obtained online at https://www.ncsl.org or requested from National
Conference of Standards Laboratories (NCSL), 2995 Wilderness Place, Suite 107, Boulder CO 80301-5404.)
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business