INCH-POUND
MIL-DTL-39000C
8 January 2013
SUPERSEDING
MIL-DTL-39000B
3 October 2003
DETAIL SPECIFICATION
FLANGES, WAVEGUIDE, RIDGE,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
This specification is inactive for new design after 8 May 1998.
1. SCOPE
1.1 Scope. This specification covers the general requirements for ridge-waveguide flanges that are used to couple
mechanically and electrically two sections of ridge-waveguides or ridge-waveguide units (see 6.1).
1.2 Part or identifying number (PIN). This specification requires a PIN that is as described in the appropriate
reference to specification sheets (see 3.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
-
Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball
Seat.
-
Screw, Cap, Slotted and Hexagon Head.
-
Screw, Cap, Socket-Head.
-
Washers, Lock (Spring).
FEDERAL STANDARDS
-
Screw Thread Standards for Federal Services.
Comments, suggestions or questions on this document should be addressed to DLA Land and Maritime, ATTN:
VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to Tubesamps@dla.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.dla.mil.
AMSC N/A
FSC 5985
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business