MIL-DTL-39000C
COMMERCIAL ITEM DESCRIPTIONS
-
Rubber, Silicone.
DEPARTMENT OF DEFENSE SPECIFICATIONS
-
Flanges, Waveguide, Double Ridge, Socket Mount (Bandwidth Ratio 2.4:1)
DEPARTMENT OF DEFENSE STANDARDS
-
Electronic and Electrical Component Parts.
-
Marking of Electrical and Electronic Parts.
(Copies of these documents are available online at https://assist.dla.mil/quicksearch or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) INTERNATIONAL
-
Rod, Brass, Free-Cutting, Bar and Shapes for use in Screw Machines.
-
Rod, Bar, and Shapes, Naval Brass.
-
Aluminum-Alloy Sand Castings.
-
Aluminum-Alloy Die Castings.
-
Aluminum-Alloy Permanent Mold Castings.
-
Copper and Copper Alloy Forging Rod, Bar, And Shapes.
-
Copper- Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bars, and Shapes
-
Tin Bronze and Leaded Tin Bronze Sand Castings.
-
Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
(Copies are available online at https://www.astm.org or from ASTM International, 100 Barr Harbor Drive, P.O. Box
C700, West Conshohocken, PA 19428-2959.)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) INTERNATIONAL
-
Surface Texture (Surface Roughness, Waviness and Lay).
-
Principles, Dimensioning And Tolerancing, Mathematical Definition Of.
(Copies are available online at https://www.asme.org or from ASME International, Three Park Avenue, New York,
NY 10016-5990.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the
text of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheets. In the event of any conflict between requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Material. The material shall be as specified (see 3.1). Acceptance or approval of any constituent material
shall not be construed as a guaranty of the acceptance of the finished product.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business