MIL-DTL-39030/11A
REQUIREMENTS:
Dimension and configurations: See figures 1 thru 3.
Electrical characteristics: See table I.
Materials:
Body: Aluminum alloy in accordance with ASTM B211 and SAE-AMS-QQ-A-225.
Finish: See table I.
Connector: Corrosion-resistant steel in accordance with SAE-AMS-QQ-S-763.
Finish: See table I.
Contact pin and contact socket: Beryllium copper in accordance with ASTM B196, ASTM B197 AND ASTM B194.
Finish: The male pin shall be a minimum gold thickness of 50 micro inches (1.27µm) in accordance
with ASTM B488, type 3, grade C, class 1.27, over 50 micro inches (1.27 µm) minimum of nickel in accordance with
AMS-QQ-N-290, class 1, measured anywhere along the mating surface, for all series. The socket
contact shall be a minimum of 50 micro inches (1.27µm) of gold in accordance with ASTM B488, type 3, grade C,
class 1.27, over 50 micro inches (1.27 µm) minimum of nickel in accordance with AMS-QQ-N-290, class 1, including
the I.D., measured at a depth of .040 inch minimum. The plating on non-significant surfaces in the I.D. shall be of
sufficient thickness to ensure plating continuity and uniform utility and protection. This plating may consist of an
underplate only. A silver underplate shall not be emitted.
Weight: See table I.
Ambient temperature range:
Operating:
Dash numbers 01 thru 03: -55°C to +125°C.
Dash number 04: -55°C to +160°C.
Nonoperating (storage):
Dash numbers 01 thru 03: -65°C to +125°C.
Dash number 04: -65°C to +175°C.
PIN: M39030/11-(dash number from table I).
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of
the changes.
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - CR
DLA -CC
Navy - EC
Air Force - 11
(Project 5985-1244-007)
DLA - CC
Review activities:
Army - AV, MI
Navy - AS, OS, SH
Air Force -19
5