MIL-DTL-39030/21A
Ambient temperature range:
Operating:
Dash numbers 01 thru 04: -55°C to +125°C.
Dash numbers 02 and 03: -65°C to +150°C.
Nonoperating (storage):
Dash numbers 01 and 04: -55°C to +125°C.
Dash numbers 02 and 03: -65°C to +150°C.
Solderability: Method 208 of MIL-STD-202, the following details and exception shall apply:
a. Number of terminations of each part to be tested: One contact.
b. Special preparation of terminations: No wiping, cleaning, scraping, or abrasive cleaning of the contact
shall be performed.
c. Depth of immersion: The entire surface of the contact shall be covered.
d. Method of mounting: The dummy load shall be mounted onto a heat sink.
e. Examination of terminations: There shall be no evidence of pinholes and blistering.
Note: This test shall be preformed after the visual and mechanical inspection in qualification.
PIN: M39030/21-(dash number from table I).
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the
extent of the changes.
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 11
(Project 5985-1244-012)
DLA - CC
Review activities:
Army - AV, MI
Navy - AS, OS, SH
Air Force - 19
4