MIL-DTL-39030/23
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Electrical characteristics:
Operating frequency: DC to 32.0 GHz.
Voltage standing wave ratio (VSWR): 1.25:1, maximum.
Power:
Average: 2.0 watts. Derated linearly from +25° C to 0.5 watts at +125° C.
Peak: 500 watts maximum at 5 microsecond pulse with a .0005 duty cycle.
Nominal characteristic impedance: 50 ohms.
Materials:
Equivalent industry standards may be used with the approval of the qualifying activity.
Body: Corrosion-resistant steel in accordance with SAE-AMS-5640.
Finish: Passivated in accordance with SAE-AMS-2700.
Contact: Beryllium copper in accordance with ASTM B196/B196M, ASTM B197/B197M and ASTM B194.
Finish: The male pin type I shall be a minimum gold thickness of 50 micro inches (1.27µm) in
accordance with ASTM B488, type 1, grade C, class 1.27, over 50 micro inches (1.27 µm) minimum of
nickel in accordance with SAE-AMS-QQ-N-290, class 1, measured anywhere along the mating
surface, for all series.
Weight: Not applicable.
Ambient temperature range:
Operating: -55° C to +125° C.
Part or Identifying Number (PIN): M39030/23-01.
Referenced documents: In addition to MIL-DTL-39030, this document references the following:
ASTM B488
ASTM B196/B196M
MIL-STD-348
ASTM B197/B197M
SAE-AMS-5640
ASTM B488
SAE-AMS-QQ-N-290
ASTM B194
SAE-AMS-2700
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business