MIL-DTL-15370/10E
REQUIREMENTS:
Design, construction, and physical dimensions: See figures 1 through 6 and table I.
Operating temperature range:
-54°C to +85°C for dash numbers 022 through 028.
-55°C to +100°C for dash numbers 014 and 020.
-54°C to +110°C for dash numbers 001 through 013, 015 through 019, 021, 023 through 027, 029, and 030.
Weight: See table I.
Electrical: See table II.
Marking: Part number (see tables I and II) shall be located as shown on figures 1 through 6.
Part number: M15370/10- (and a dash number from table I).
Referenced Documents: In addition to MIL-DTL-15370, this document references the following:
MIL-PRF-39012/55
The margins of this specification are marked with vertical lines to indicate where modifications from this revision were
made. This was done as a convenience only and the Government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document
based on the entire content irrespective of the marginal notations.
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
(Project 5985-2012-035)
Air Force - 85
DLA - CC
Review activities:
Navy - AS, CG, MC, OS, SH
Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.dla.mil/.
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business