MIL-DTL-87104C
4.9.2.4 Conformance test certification. In addition, each conformance test report shall contain the following
certification which shall be signed by a responsible officer of the contractor's organization.
The design, construction, materials, finishing, and processes are identical to the model that was
4.9.2.5 Conformance test results. The results of conformance testing on coaxial cable shall be submitted with the
sampling plan test report for the assembly.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel
need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
6. NOTES:
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The coaxial assemblies covered by this general specification are intended for use with airborne
electronic systems.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, and date of this specification or the detail specification sheet.
b.
First article test program.
(1)
Number of first article test samples.
(2)
Point of inspection.
c.
Conformance test program.
(1)
Sample plan(s) required (see 4.5.2).
(2)
Point of inspection.
d.
Test level and test plan for reliability testing, if required (see 4.7).
e.
Test method for maintainability demonstrations, if required (see 4.8).
f.
Selection of applicable levels of preservation and packaging, and packing.
Reliability requirements, when applicable (see 3.4.7).
g.
h.
i.
Safety requirements, when applicable (see 3.4.8).
Human engineering requirements, when applicable (see 3.4.9).
j.
63
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business