MIL-HDBK-660 Fabrication Of Rigid Waveguide Assemblies Sweep Bends And TwistsThis handbook is intended for the electronic installations technician to be used as a guide for fabricating rectangular waveguide bends and twists used in the microwave region of the electronic spectrum.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47

MIL-HDBK-660B FOREWORD

1.   This handbook is approved for use by all Departments and Agencies of the Department of Defense.

2.  This document provides information on methods of fabricating waveguide assemblies for rigid RF transmission lines.  It provides information and guidance to personnel concerned with the fabrication of waveguide assemblies to

fix equipments and circuits in the field.  The handbook is not intended to be referenced to purchase specifications except for informational purposes, nor should it supersede any specification requirements.

3.  Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime, ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to Tubesamps@dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online

database at https://assist.dla.mil.

ii