MIL-DTL-5815H
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
-
Identification Marking of U. S. Military Property.
MIL-STD-202
-
Electronic and Electrical Component Parts.
MIL-STD-889
-
Dissimilar Metals.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-454 -
General Guidelines for Electronic Equipment.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or from Standardization
Document Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, issues of these documents are those cited in the solicitation or contract (see 6.2).
NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)
NCSL-Z540.3
-
Laboratories, Calibration, and Measuring and Test Equipment.
(Copies of this document are available online at https://www.ncsli.org or from National Conference of Standards
Laboratories (NCSL), 2995 Wilderness Place, Suite 107, Boulder CO 80301-5404.)
ASTM INTERNATIONAL (ASTM)
ASTM-G21
-
Materials to Fungi, Synthetic Polymeric, Determining Resistance of.
(Copies of these documents are available online at https://www.astm.org or from ASTM International, 100 Bar
Harbor Dr., P. O. Box C700, West Conshohocken, PA, USA, 19428-2959.)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE STD 149
-
Test Procedures for Antennas.
th
(Copies should be obtained online at https://www.ieee.org or at IEEE, 345 E 47 Street, New York, New York
10017).
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the
text of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheets. In the event of any conflict between requirements of this specification and the
specification sheets, the latter shall govern (see 6.2).
3.2 First article. Antennas furnished under this specification shall be products that have been tested in accordance
with first article tests prescribed herein and that have been approved by the responsible design activity listed in 6.3.
3.3 General specification. The requirements for the specified, class of equipment apply as requirements of this
specification with the exceptions and additions called out herein (see 3.1). In the event of conflict between this
specification and the applicable documents (see 2.1 and 2.2), the requirements of this specification shall govern.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business