MIL-PRF-49204B(CR)
2.2 Non-Government publications. The following document(s) from a part
of this document to the extent specified herein. Unless otherwise specified ,
the issues of the documents which are DoD adopted are those listed in the
issue of the DODISS cited in the solicitation. Unless otherwise specified,
the issues of documents not listed in the DODISS are issues of the document
cited in the solicitation (see 6.2)
Electronic Industries Associated Standard
RS-329
Minimum Standards for Land-Mobile
Communications Antennas, Part I - Base or
Fixed Station Antennas, Dec. 1966
(Applications for copies should be address to the Electronics Industries
Association, 2500 Wilson Boulevard, Arlington, VA 22201-3834)
2.3 Order of precedence. In the event of a conflict between the text
of this document and the references cited herein (except for related
associated specification or specification sheets), the text of this document
takes precedent. Nothing in this document, however, supersedes applicable
laws and regulations unless a specific exemption has been obtained .
3.
REQUIREMENTS
3.1 First Article. Unless otherwise specified by the contract or
purchase order, the contractor shall furnish First Article units in accordance
with 4.2.
3.2 Dimensions. The outline characteristics of the Antenna Group, OE-
254/GRC shall be in accordance with figures 3 and 4 of this specification to
ensure proper interface and dimensional requirements for compatibility with
the family of antenna groups.
3.3 Parts, materials and processes. The contractor shall select the
parts, materials and process but these materials shall be capable of meeting
all of the operational and environmental performance requirements specified
herein.
3.4 Configuration. The configuration of every Antenna Group OE-254/GRC
on order shall include the following:
ITEM
QUANTITY
Antenna AS-3166 ( )/GRC
1 each
Transmission Line
1 each
Mast AB-1244 ( )/GRC
1 each
Accessory Items
1 of each
Bag
1 each
Running Spares
1 set
3.4.1 Transmission Line. The transmission line shall be Cable
Assembly, Radio Frequency CG-1889 C/U (80 ft. 0 in) in accordance with the
dimensional and interface requirements of Data List A3003195. The cable
assembly shall consist of RG-213/U Cable terminated at each end with RF
Coaxial Connector M-39012/01-007. (See 4.12.2)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business