MIL-DTL-24044C
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) INTERNATIONAL
-
Surface Texture (Surface Roughness, Waviness, and Lay).
(Copies are available online at https://www.asme.org/ or at ASME INTERNATIONAL, Three Park Avenue, New
York, NY 10016-5990.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) INTERNATIONAL
-
Tubing for General Service, Seamless and Welded Austenitic Stainless Steel.
Rod, Brass, Free-Cutting, Bar and Shapes for use in Screw Machines.
Rod, Bar, and Shapes, Naval Brass.
Aluminum-Alloy Sand Castings.
Aluminum-Alloy Die Castings.
Plate, Phosphor Bronze, Sheet, Strip, and Rolled Bar.
Aluminum-Alloy Permanent Mold Castings, Standard Specification for.
Copper and Copper Alloy Forging Rod, Bar, and Shapes.
Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bars, and Shapes.
-
Aluminum and Aluminum-Alloy Bar, Rod, and Wire.
-
Castings, Copper Alloy Sand, for General Applications.
-
Electrodeposited Coatings of Silver for Engineering Use.
-
Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials,
Standard Specification for.
-
Polytetrafluoroethylene (PTFE) Resins Produced from Dispersion.
(Copies are available online at https://www.astm.org/ or at ASTM INTERNATIONAL, 100 Barr Harbor Drive, P.O.
Box C700, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the
text of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheets. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Material. The material shall be as specified herein (see 3.1).
3.2.1 Copper-base alloys.
3.2.1.1 Bar stock. When fabricated from bar stock, flanges shall be made of leaded red brass, leaded brass, or
naval brass.
3.2.1.1.1 Leaded red brass. Leaded brass shall be half-hard, in accordance with ASTM-B140/B140M.
3.2.1.1.2 Leaded brass. Leaded brass shall be half-hard in accordance with ASTM-B16.
3.2.1.1.3 Naval brass. Naval brass shall be alloy A or alloy C, half-hard, in accordance with ASTM-B21.
3.2.1.2 Casting. When fabricated by casting, flanges shall be made of leaded tin bronze conforming to alloy 2A or
1B, condition as cast, in accordance with ASTM-B584.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business