MIL-DTL-49295C
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel
need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. Antenna Group OE-303( )/GRC is intended for use with radio sets AN/VRC-12, AN/VRC-43
through AN/VRC-49, AN/VRC-53, AN/VRC-64, AN/GRC-125, and AN/GRC-160.
6.2 Acquisition requirements. Acquisition documents must specify the following:
(a) Title, number, and date of this specification and any amendment thereto.
(b) The specific issue of individual documents referenced (see 2.2).
(c) Packaging requirements (see 5.1).
(d) Place of final inspection.
(f) When the rough handling test is required.
(g) When first article inspection rough handling tests are not required.
6.3 Environmental. Environmental pollution prevention measures are contained in the packaging material
specifications referenced herein. Refer to material specifications or preparing activity for recommended disposability
methods.
6.4 Group C inspection. Approval to ship may be withheld, at the discretion of the Government, pending the
decision from the contracting officer on the adequacy of corrective action (see 4.4.3.2).
6.5 Nomenclature. The parenthesis in the nomenclature will be deleted or replaced by a letter identifying the
particular design; for example: OE-303W/GRC. The contractor should apply for nomenclature in accordance with
the applicable clause in the contract.
6.6 Verification inspection. Verification by the Government will be limited to the amount deemed necessary to
determine compliance with any contract and will be limited in severity to the definitive quality assurance provisions
established in this specification and the contract. The amount of verification inspection by the Government will be
adjusted to make maximum utilization of the contractors quality control system and the quality history of the product.
6.7 Level B preservation. When level B preservation is specified, this level of protection will only be used under
known favorable conditions during transportation, storage, and handling.
15
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business