MIL-DTL-55041F
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-3922
-
Flanges, Waveguide, General Purpose, General Specification for.
MIL-DTL-5541
-
Chemical Conversion Coatings on Aluminum and Aluminum Alloys.
MIL-PRF-22750
-
Coating, Epoxy High Solids.
MIL-PRF-23377
-
Primer Coatings, Epoxy, High-Solids.
MIL-P-24691/3
-
Pipe and Tube, Corrosion-Resistant, Stainless Steel, Seamless or
Welded.
MIL-DTL-38999
-
Connectors, Electrical, Circular, Miniature, High Density, Quick
Disconnect (Bayonet, Threaded, and Breech Coupling),
Environment Resistant, Removable Crimp and Hermetic Solder
Contacts, General Specification for.
MIL-DTL-55041/10
-
Switch, Waveguide, Electromechanical, Latching, Frequency Range
8.6 to 10.3 GHz.
MIL-DTL-55041/11
-
Switch, Waveguide, 1P2T, Latching.
MIL-DTL-83723
-
Connectors, Electrical, (Circular, Environment Resisting),
Receptacles and Plugs, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202
-
Electronic and Electrical Component Parts.
MIL-STD-889
-
Dissimilar Metals.
MIL-STD-1285
-
Marking of Electrical and Electronic Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, Building 4D, 700 Robbins Avenue,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following document(s) form a part of this document to the extent specified
herein. Unless otherwise specified, issues of these documents are those cited in the solicitation or contract (see 6.2).
ASME INTERNATIONAL (ASME)
ASME-B46.1
-
Surface Texture, (Surface Roughness, Waviness and Lay).
(Copies of this document are available online at https://www.asme.org or from ASME International, Three Park
Avenue, New York, NY 10018.)
ASTM INTERNATIONAL (ASTM)
ASTM-A240/A240MB
-
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for
Pressure Vessels and for General Applications.
ASTM-A666
-
Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and
Flat Bar.
ASTM-A693
-
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and
Strip.
ASTM-B26/B26M
-
Aluminum-Alloy Sand Castings.
ASTM-B36/B36M
-
Plate, Brass, Sheet, Strip, and Rolled Bar.
ASTM-B85/B85M
Aluminum-Alloy Die Castings.
-
ASTM-B108/B108M
-
Aluminum-Alloy Permanent Mold Castings.
ASTM-B121/B121M
-
Plate, Leaded Brass, Sheet, Strip and Rolled Bar.
ASTM-B209
-
Aluminum and Aluminum-Alloy Sheet and Plate.
ASTM-B221
-
Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.
(Copies of these documents are available online at https://astm.org or from ASTM INTERNATIONAL, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business