MIL-DTL-55041F
4.6 Conformance inspection.
4.6.1 Inspection of product for delivery. Inspection of product for delivery shall consist of group A inspection and,
when applicable, screening.
4.6.1.1 Inspection lot. An inspection lot shall consist of all waveguide switches of the same PIN, produced under
essentially the same conditions, and offered for inspection at one time.
4.6.1.2 Screening. Screening shall consist of the inspections specified in table III, in the order shown. Switches
shall pass screening before being subjected to group A inspection.
TABLE III. Screening.
Inspection
Requirement
Test
paragraph
method
paragraph
Thermal shock - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Run-in - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3.5
Visual and mechanical inspection - - - - - - - - - - - - - - -
4.7.1
4.6.1.3 Group A inspection. Group A inspection shall consist of the inspections specified in table IV, in the order
shown.
4.6.1.4 Sampling plan. All screened switches shall be subjected to screening and group A inspection. All
nonscreened switches shall be subjected to group A inspection. Defective units shall be individually rejected.
4.6.1.5 Disposition of sample units. Switches which have passed all the group A inspection shall be delivered on
the contract or purchase order.
4.6.1.6 Rejected items. If an inspected item is rejected, the contractor may rework it to correct the defect and
resubmit for reinspection. Such items shall be separate from new items, and shall be clearly identified as reinspected
items.
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business